 | Up a level |
Amaresh Kumar Dhadange, . and Hanumantharaju, H.G. and Suresh, . and Karthik, K.K. and Ananda, S. (2015) Analytical Investigationand Comparision on Performance of SS316, SS440c and Titanium Alloy Tool Materials Used as Single point Cutting tool. International Journal of Engineering Research and Applications ;, 5 (8). pp. 55-61. ISSN 2248 - 9622
Amarnath, G. and Sharma, K.V. (2013) Microstructure and Tribological Properties of Nanoparticulate WC/AL Metal Matrix Composites. International Journal of Mechanical Engineering and Technology, 4 (2). pp. 178-188. ISSN 0976 – 6359
Aprameyan, S. and Kempaiah, U.N. (2013) Dry Sliding wear behaviour of Ferrite-Martensite Dual Phase Steels. International Journal of Engineering Research & Technology (IJERT), 2 (10). pp. 2658-2663. ISSN 2278-0181
Ashwini, V. and Dharanendra, Y T. and Kumaraswamy, H S and Rajaprakash, B.M. (2019) Design Principles, Enabling Technologies and Challenges for Smart Manufacturing Systems towards Industry 4.0. Manufacturing Technology Today, 18 (6). pp. 50-58. ISSN 0972-7396
Avinash, S. and Hanumantharaju, H.G. and Vignesh, M. and Akash, S. (2014) Investigation of Mechanical properties on Vinylester based bio composite with Gelatin as randomly distributed filler material). International Journal of Research in Engineering and Technology, 3 (11). pp. 252-258. ISSN 2319 - 1163
Azeem Pasha, . and Rajaprakash, B.M. and Nayeem Ahmed, M. and Tariq hafeezi, . and Manjunath, A.C. (2020) Carbon Nanotube Reinforced Metal Matrix Composites by Powder Metallurgy: A Review. PASHA et al., Mat. Sci. Res. India, 17 (3). pp. 201-206. ISSN 0973-3469
Babu Kiran, B.V. and Harish, G. (2014) Effect of Resin and Thickness tensile properties of laminated Composites. American International Journal of Research in Science, Technology, Engineering & Mathematics, 5 (2). pp. 128-134. ISSN 2328 - 3580
Balaji, S. and Saravanan, R. and Kapilan, N. (2017) Influence of pyrogallol antioxidant on performance and emissions of a CI fuelled with neem oil biodiesel. International Journal of Mechanical Engineering and Technology, 8 (8). pp. 981-987. ISSN 09766340
Benal, M.M. and Shivanand, H.K. (2007) Effects of reinforcements content and ageing durations on wear characteristics of Al (6061) based hybrid composites. Wear, 262 (5-6). pp. 759-763. ISSN 0043-1648
Benal, M.M. and Shivanand, H.K. (2006) Influence of heat treatment on the coefficient of thermal expansion of Al (6061) based hybrid composites. Materials Science and Engineering A, 435-43. pp. 745-749. ISSN 09215093
Benal, M.M. and Shivanand, H.K. and Govindaraju, N. and Divyasree, . (2007) The effect of thermal ageing on the wear behaviour of Al 6061 based hybrid composites. Journal of the Institution of Engineers (India), Part MM: Metallurgy and Material Science Division, 88 (APR.). pp. 14-18. ISSN 2250-2130
Bendigeri, C. and Hegde, D. and Narayana, K.B. and Ramachandrad, K. (2010) Experimental measurement of displacement and vibration of piezoelectric smart structures. International Journal of Mechanical Engineering Education, 38 (3). pp. 185-195. ISSN 03064190
Bharath, V.G. and Ranjith, S. and Shantharaja, M. (2013) Topology and Size Optimization of Composite Ply Cargo Door. International Journal of Engineering Research & Technology, 2 (10). pp. 2095-2100. ISSN 2278-0181
Bharath, V.G. and Vikram Krishna, . and Shantharaja, M. (2013) Implementation Of Transfer Matrix Analysis Of Multi-Section Rotors Using Ansys Parametric Design Language. International Journal of Advances in Engineering & Technology, 6 (5). pp. 2103-2111. ISSN 2231-1963
Bhaskara Naidu, A.C. and Srinath, H. (1979) Flexure of orthotropic rotating disks. International Journal of Mechanical Sciences, 21 (9). pp. 567-574. ISSN 0020-7403
Bhat, V.H. and Krishna, S. and Shenoy, P.D. (2010) SURF: Steganalysis using random forests. In: Proceedings of the 2010 10th International Conference on Intelligent Systems Design and Applications, ISDA'10, 29 November 2010 through 1 December 2010, Cairo; Egypt;.
Biradar Shivanand Rajendra, . and Dadapeer, B. and Umesh, C.K. (2015) Analysis of Feed force, Tangential Force and Surface Roughness in Turning EN-353 Steel using uncoated ceramic cutting tool using Taguchi Method. International Journal for Scientifi c Research & Development, 3 (5). pp. 636-638. ISSN 2321 - 0613
Chandrashekar, H. and Lokesh, K.V. and Jyothi Roopa, . and Ranganna, G. (2012) On Water Quality Aspects of Manchanabele Reservoir Catchment and Command Area (karnataka). International Journal of Advanced Engineering Technology, 03 (05). pp. 137-143. ISSN 0976-3945
Chandrashekhar Bendigeri, . and Badari Narayana, K. and Ramachandra, K. (2013) Finite Element Development for Analytical of Smart Structure. International Journal of Mechanical Engineering, 6 (1). pp. 42-44. ISSN 2347-5188
Chandrashekhar Bendigeri, . and Jwalesh,, H.N. (2016) Investigation of Bending Behaviour of Polymer Matrix Composite with Jute Fibers as Reinforcement. International Journal of Advanced Engineering Research and Science (IJAERS), 3 (12). pp. 73-77. ISSN 2349-6495
Channabasavaraju, S. and Shivanand, H.K. and Santhosh Kumar, S. (2013) Evaluation of Tensile and Flexural Properties of Polymer Matrix Composites. International Journal of Modern Engineering Research (IJMER), 3 (5). pp. 3177-3180. ISSN 2249 - 6645
Channabasavaraju, S. and Shivanand, H.K. and Santhosh Kumar, S. (2013) Investigation of Low velocity Impact Properties of Kevlar Fiber Reinforced Polymer Matrix Composites. International Journal of Engineering Research & Technology (IJERT), 2 (10). pp. 680-682. ISSN 2278-0181
Chenna Basappa Hampali, . and Chandrashekhar Bendigeri, . (2015) Investigation of Basic mechanical properties of Jute Reinforced polyster composites for Patellar Implant Application. International Journal Of Scientific Research And Education, 3 (12). pp. 4681-4686. ISSN 2321 - 7545
Chittappa, H.C. (2013) Energy Absorption Behaviour Of Semi-Rigid Polyurethane Foam Under Low Velocity Impact. International Journal of Mechanical Engineering and Technology(IJMET), 4 (3). pp. 118-124. ISSN 0976 – 6359
Chowdiah, M.P. and Bhattacharyya, A. (1981) Economics of NC in Developing Countries like India. CIRP Annals - Manufacturing Technology, 30 (1). pp. 515-518. ISSN 00078506
Dadapeer, B. and Umesh, C.K. (2014) Analysis of Forces and Surface Roughness on Hardened steel with uncoated ceramic insert using Taguchi Technique. International Journal of Emerging Technology and Advanced Engineering, 4 (4). pp. 227-231. ISSN 2250 - 2459
Dadapeer, B. and Umesh, C.K. (2014) Application of Taguchi technique for Analysis of Forces and surface finish during Hard Machining of Steel EN-24 using Ceramic tool insert. International Journal of Latest Trends in Engineering and Technology (IJLTET), 3 (4). pp. 81-87. ISSN 2278-621X
Deepak Kumar, T. and Manjunatha, . and Ramesha, D.K. (2020) The Effects of Silicon Oxide as an Additive with a Cotton Seed Oil Biodiesel Blend in a CI Engine. Manufacturing Technology Today, 19 (7-8). pp. 20-25. ISSN 0972-7396
Dharanendra, Y.T. and Kumaraswamy, H.S. and Ashwini, V. and Rajaprakash, B.M. (2019) IoT Based Smart Manufacturing system-Case Studies. Manufacturing Technology Today, 18 (6). pp. 42-48. ISSN 0972-7396
Ezhil Vannan, . and Paul Vizhian, . (2014) Prediction of the Elastic Properties of Short Basalt Fiber Reinforced Al Alloy Metal Matrix Composites. Journal of Minerals and Materials Characterization and Engineering, 2 (1). pp. 61-69. ISSN 2327-4085
Ezhil Vannan, S. and Paul Vizhian, S. (2014) Corrosion Characteristics of Short Basalt Fiber Reinforced with Al-7075 Metal Matrix Composites in Sodium Chloride Alkaline Medium. Journal of Chemical Engineering and Chemistry Research, 1 (2). pp. 122-131. ISSN 2333-9209
Ezhil Vannan, S. and Paul Vizhian, S. (2013) "Development and Characterization of Copper-Coated Basalt Fiber Reinforced Aluminium Alloy Composites". International Journal of Engineering Research & Technology, 2 (8). pp. 37-47. ISSN 2278-0181
Ezhil Vannan, S. and Paul Vizhian, S. (2014) Dry Sliding Wear Behaviour of Basalt Short Fiber Reinforced Aluminium Metal Matrix Composites. Applied Mechanics and Materials, 592 (594). pp. 1285-1290. ISSN 1662-7482.
Ezhil Vannan, S. and Paul Vizhian, S. (2013) Investigation on the Influence of Basalt Short Fiber on Thermo-Physical Properties of Aluminium Metal Matrix Composites. International Journal of Soft Computing and Engineering (IJSCE), 3 (3). pp. 160-164. ISSN 2231-2307
Ezhil Vannan, S. and Paul Vizhian, S. (2014) Microstructure and Mechanical Properties of as Cast Aluminium Alloy 7075/Basalt Dispersed Metal Matrix Composites. Journal of Biosciences and Medicines, 2 (3). pp. 182-193. ISSN 2327-5081
Ezhil Vannan, S. and Paul Vizhian, S. (2014) Prediction of the Elastic Properties of Short Basalt Fiber Reinforced with Al7075 Alloy Metal Matrix Composites. Journal of Minerals and Materials Characterization and Engineering, 2 (1). pp. 61-69. ISSN 2327-4076
Ezhil Vannan, S. and Paul Vizhian, S. (2014) Statistical investigation on effect of Electroless coating Parameter on Coating Morphology of Short Basalt Fiber. Jordan Journal of Mechanical and Industrial Engineering, 8 (3). 153 -160. ISSN 1995-6665
Ezhil Vannan, S. and Paul Vizhian Simson, . (2014) Corrosion Behaviour of Short Basalt Fiber Reinforced with Al7075 Metal Matrix Composites in Sodium Chloride Alkaline Medium. Journal of Chemical Engineering and Chemistry Research, 1 (2). pp. 122-131. ISSN 2333-9209
Ganga Reddy, C. and Shantharaja, M. (2016) Experimental and Numerical Analysis of Elasto-Plastic Behaviour of Notched Specimen to Tensile and Compressive Cyclic Loading. International Journal of Engineering Research and Applications, 5 (3). pp. 11-15. ISSN 2248-9622
Ganga Reddy, C. and Shantharaja, M. (2015) “Statistical Investigation of Parameters influence in fracture toughness of glass fibre reinforced composites. International Journal of Emerging Technology and Advanced Engineering, 5 (4). pp. 219-224. ISSN 2250 - 2459
Girish, B.M. and Satish, B.M. and Sadanand Sarapure, . and Basawaraj, M. (2016) Optimization of Wear Behavior of Magnesium Alloy AZ91 Hybrid Composites Using Taguchi Experimental Design. METALLURGICAL AND MATERIALS TRANSACTIONS A, 47. pp. 3193-3200. ISSN 1073-5615
Girisha, K.B. and Chittappa, H.C. (2014) Characterization and Property Evaluation of A356.1 Aluminum Alloy Reinforced with MgO Nano Particle. International Journal of Engineering Research & Technology (IJERT), 3 (6). pp. 1545-1551. ISSN 2278-0181
Girisha, K.B. and Chittappa, H.C. (2013) Preparation, Characterisation And Wear Study Of Aluminium Alloy (Al356.1) Reinforced With Zirconium Nano Particles. International Journal of Innovative Research in Science, Engineering and Technology, 2 (8). pp. 3627-3637. ISSN 2319 - 8753
Girisha, K.B. and Chittappa, H.C. (2014) Wear performance and hardness property of A356.1 Aluminium alloy reinforced with Zirconium Oxide Nano particle. International Journal of Engineering Sciences & Research Technology, 3 (6). pp. 725-731. ISSN 2277-9655
Gnanendra, P.M. and Ramesha, D.K. and Dasappa, S. (2012) Preliminary investigation on the use of biogas sludge for gasification. International Journal of Sustainable Energy, 31 (4). pp. 251-267. ISSN 1478-646X
Haneef, M. and Govindaraju, N. (2003) A Study of Pin Joints in Composite Laminated Structures. Materials Science Forum, 437-43. pp. 329-332. ISSN 02555476
Haneef, M. and Govindaraju, N. and Asdaque, H. (2003) Finite Element Analysis of Fastener Joints in Metallic and Orthotropic Structures. Materials Science Forum, 437-43. pp. 395-398. ISSN 02555476
Hanumantharaju, H.G. and Motupalli Jayaprasad, . (2015) Free vibrational analysis of curved beam with uniform rectangular cross section. International Journal of Research in Engineering and Technology, 4 (11). pp. 356-361. ISSN 2319 - 1163
Hanumantharaju, H.G. and Shivanand, H.K. (2010) Strength analysis & comparison of SS316L, Ti-6Al-4V & Ti-35Nb-7Zr-5Ta used as orthopaedic implant materials by FEA. In: ICBEE 2010 - 2010 2nd International Conference on Chemical, Biological and Environmental Engineering, Proceedings, 2 November 2010 through 4 November 2010, Cairo,Egypt.
Harish, G. and Babu kiran, B.V. (2014) Influence of Rrsin and Thickness of Laminate on Flexural Properties of Laminated Composites. International Journal of Engineering Science and Innovative Technology, 3 (1). pp. 279-287. ISSN 2319-5967
Harish, M.S. and Ramesha, D.K. and Jayalakshmi, K. (2021) A Study on Design Modification and Validation by Static and Dynamic Load Analysis of Sae-1020 and 40c8 Grade Steel Connecting Rods of 4-Stroke Petrol Engine. AIP Conference Proceedings, 2316 (1). ISSN 1551-7616
Honnegowda, . and Ramesha, D.K. (2013) Effect of Injection Pressure on the Performance and Emission Characterstics of CI Engine with Cotton Seed Oil Methyl Ester. International Journal of Innovative Research in Science, Engineering and Technology, 2 (9). pp. 4796-4802. ISSN 2319 - 8753
Honnegowda, . and Ramesha, D.K. (2013) A Study on the Effect of Injection Pressures On the Performance and Emission Characterstics of CI Engine with PongamiaPinnata Methyl Ester as Fuel. International Journal of Engineering Research and Applications, 3 (5). pp. 1553-1558. ISSN 2248 - 9622
Jagannatha, T.D. and Harish, G. (2015) Influence of Carbon & Glass Fiber Reinforcements on Flexural Strength of Epoxy Matrix Polymer Hybrid Composites. International Journal of Engineering Research and Applications ;, 5 (4). pp. 109-112. ISSN 2248 - 9622
Jagannatha, T.D. and Harish, G. (2015) Influence of carbon & Glass Fiber Reinforcement on Flexural Strength of Epoxy Matrix Polymer Hybrid Composites. International Journal of Engineering Research and Applications, 5 (4). pp. 109-112. ISSN 2248 - 9622
Jagannatha, T.D. and Harish, G. (2015) Mechanical Properties of Carbon/Glass Fiber Reinforced Epoxy Hybrid Polymer Composites. International Journal of Mechanical Engineering and Robotics Research, 4 (2). pp. 131-137. ISSN 2278-0149
Jayalakshmi, N. and Ramesha, D.K. and PremaKumara, G. (2012) Experimental verification of mold filling analysis for an automotive recliner lever. International Journal of Applied Engineering Research, 7 (6). pp. 673-680. ISSN 09734562
Joseph, S. and Kamath, P.V. and Upadhya, S. (2009) Electrochemical synthesis of oriented CuO coatings on stainless steel substrates: Solution-mediated control over orientation. Journal of the Electrochemical Society, 156 (1). E18-E22. ISSN 00134651
Karthigeyan, R. and Ezhil Vannan, S. and Ranganath, G. and Paul Vizhian, S. and Annamalai, K. (2013) Effect of coating parameters on coating morphology of basalt short fiber for reinforcement preparation of al/basalt metal matrix composites. International Journal of Electrochemical Science, 8 (8). pp. 10138-10148. ISSN 14523981
Karthigeyan, R. and Ranganath, G. and Ezhil Vannan, S. and Paul Vizhian, S. and Annamalai, K. (2013) Review of al metal matrix composite and basalt fiber as a new reinforcement for MMC. Life Science Journal, 10 (SUPPL.). pp. 522-527. ISSN 10978135
Kazemi, A.D.A. and Murthy, N.S. and Raju, N.G. (1989) Stress intensity factor determination of radially cracked circular rings subjected to tension using photoelastic technique. Engineering Fracture Mechanics, 32 (3). pp. 403-408. ISSN 00137944
Kothakota Suresh Kumar, . and Amaresh Kumar Dhadange, . and Hanumantharaju, H.G. and Monish, G. and Sridhara, S.M. (2015) Investigation on SS316, and SS440C and Titanium alloy Grade-5 used as a single point cutting tool. International Journal of Engineering Research and Applications ;, 5 (1). pp. 1-5. ISSN 2248 - 9622
Kumaraswamy, H S and Rajaprakash, B.M. and Dharanendra;, Y.T. and Ashwini, V. (2019) A Review on Challenges and Opportunities for Implementing Industry 4.0 in India. Manufacturing Technology Today, 18 (6). pp. 34-41. ISSN 0972-7396
Kushal, K.L. and Vidhyasagar, H.N. and Madan, Y.M. and Ramesha, D.K. (2021) Design and Analysis of Nozzle for Reverse Thrust Braking System. AIP Conference Proceedings, 2316 (1). ISSN 1551-7616
Lingaiah, K. and Ramachandra, K. (1976) Photoelastic Optimization of the Profiles of Wildhaber-Novikov Gears. Experimental Mechanics, 16 (3). pp. 116-120. ISSN 1741-2765
Lingaiah, K. and Suryanarayana, B.G. (1986) STRENGTH AND STIFFNESS OF SANDWICH BEAMS IN BENDING. STRENGTH AND STIFFNESS OF SANDWICH BEAMS IN BENDING., 31 (1). pp. 484-493. ISSN 1741-2765
Lingaiah, K. and Suryanarayana, B.G. (1991) Strength and stiffness of sandwich beams in bending. Experimental Mechanics, 31 (1). pp. 1-7. ISSN 1741-2765
Madhu, D. and Santhoshkumar, M.K. and Swarnalatha Srinivas, . and Narendra Kumar, G. (2014) LOW ALTITUDE AIRSHIPS FOR SEAMLESS MOBILE COMMUNICATION IN AIR TRAVEL. Computer Science & Information Technology, 4 (11). pp. 197-206. ISSN 2231-5403
Madhu, H.J. and Shantharaja, M. (2020) Compressive Behavior of Aluminum Alloy Aa6060 Subjected to Cyclic Extrusion and Compression Process. AIP Conference Proceedings, 2247 (1). ISSN 0094-243
Mahendra, S.P. and Krishnamurthy, . (2004) Carbon monoxide concentration due to urban traffic: a statistical approach. Nature, Environment and Pollution Technology, 3 (4). pp. 473-476. ISSN 0972-6268
Mahendra, S.P. and Krishnamurthy, . (2005) Prediction of carbon monoxide concentration due to road traffic using CALINE4 model. Nature, Environment and Pollution Technology, 4 (1). pp. 39-42. ISSN 0972-6268
Mahendramani, G. and Lakshmana Swamy, N. (2016) Effect of Root Opening on Distortion of Butt-Joints in Submerged Arc Welding. Indian Welding Journal, 49 (1). pp. 48-56. ISSN 0046-9092
Mahesh, V.M. and Muralidhara, B.K. and Raji George, . (2014) Studies on Influence MultiWalled Carbon-Nano-Tubes (MWCNT) Reinforced. International Journal of Modren Engineering Research, 4 (1). pp. 58-63. ISSN 2249 – 6645
Mahesh, V.M. and Muralidhara, B.K. and Raji George, . and Trisha, K. (2014) Study of wear test on hybrid material reinforced Epoxy based Composites. International Journal of Research in Advent Technology, 2 (12). pp. 66-69. ISSN 2321-9637
Mahesh Shankar, . and Kumar, K. and Ajit Prasad, S.L. (2010) T-root blades in a steam turbine rotor: A case study. Engineering Failure Analysis, 17 (5). pp. 1205-1212. ISSN 2213-2902
Mahesha, C.R. and Shivarudraiah, . and Mohan, N. and Rajesh, M. (2017) Role of Nanofillers on Mechanical and Dry sliding Wear Behavior of Basalt- Epoxy Nanocomposites. In: Materials Today.
Mahesha, C.R. and Shivarudraiah, . and Mohan, N. and Suprabha, R. (2017) Three Body Abrasive Wear Studies on Nanoclay/NanoTiO2 filled Basalt-Epoxy Composites. In: Materials Today: Proceedings, Mallathahalli.
Manjunatha, G. and Sharath, G.S. and Srinivas, S. (2017) Experimental studies on the energy absorption capacity of axially compressed metal tubes. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 38-47. ISSN 09766340
Manjunatha, R. and Umesh, C.K. (2015) Analysis and Prediction of feed force, tangential force, surface roughness and flank wear in Turning with uncoated carbide cutting tool using both Taguchi and Grey based taguchi method. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (7). pp. 1766-1774. ISSN 3159 - 0040
Manjunatha, R. and Umesh, C.K. (2014) Optimization of feed force, tangential force and surface roughness by using grey based Taguchi method. International Journal of Latest Trends in Engineering and Technology (IJLTET, 3 (4). pp. 158-165. ISSN 2278-621X
Math, M.C. and Kumar, S.P. and Chetty, S.V. (2011) Application of Taguchi experimental design for optimization of biodiesel production by transesterification of used cooking oil with methanol. International Journal of Applied Engineering Research, 6 (13). pp. 1591-1598. ISSN 1087--1090
Mohan, N. and Mahesha, C.R. and Shivarudraiah, . and Rajesh Mathivanan, N. and Shivamurthy, B. (2013) Dry sliding wear behaviour of Ta/NbC filled glass-epoxy composites at elevated temperatures. Procedia Engineering, 64. pp. 1166-1172. ISSN 1877-7058
Mrityunjaya Swamy, K.M. and Ramesha, D.K. (2015) The Effect of Injection Pressure and Injection timing on the Performance and Emission Parameters with Algae oil Methyl Ester Blend as a Fuel for CI Engine. International Journal of Scientific and Research Publications, 5 (11). pp. 210-215. ISSN 2250 - 3153
Mudasar Pasha, B.A. and Abdul Budan, D. and Basavarajappa, S. and Manjunath Yadav, S. and Nizamuddin, B.A. (2013) Studies on wear resistance of PTFE filled with glass and bronze particles based on Taguchi technique. Journal of Thermoplastic Composite Materials, 26 (2). pp. 243-259. ISSN 0892-7057
Murthy, V. and Ullegaddi, K. and Mahesh, B. and Rajaprakash, B.M. (2017) Application of Image Processing and Acoustic Emission Technique in Monitoring of Friction Stir Welding Process. In: Materials Today.
Muzakkir Ahmed Khan, . (2014) A Overview on Effect of Reinforcement and Process Parameters on Properties of Aluminium Based Metal Matrix Composite. International Journal of Research in Engineering and Science, 2 (10). 08-12. ISSN 2320-9364
Nagaraj Kori, . and Kempaiah, U.N. (2013) Effect of Fatigue Crack Growth Rate on Varied Percentage of Martensite for Welded DP Steel. International Journal of Engineering and Innovative Technology, 2 (9). pp. 71-75. ISSN 2277 - 3754
Nandish, R.V. and Madhu, E. and Vizhian, S.P. and Ramachandra, S. (2017) Dynamic vibration analysis of ti-alloy gas turbine blade rotating at high speed after grind-out repair of foreign object damage. International Journal of Mechanical Engineering and Technology, 8 (4). pp. 202-211. ISSN 09766340
Nanjundaiah, . and Ramesha, D.K. (2016) Corn and Rice Bran Biodiesel Blend as Alternative fuels for Diesel Engine at Different Injection Pressures. IOSR Journal of Mechanical and Civil Engineering, 13 (4). pp. 81-90. ISSN 2278 - 1684
Nayeem Ahmed, M. and Vijaya Kumar, P. and Shivanand, H.K. and Syed Basith Muzammil, . (2013) A Study on Effect of Variation of Thickness on Tensile Properties of Hybrid Polymer Composites (Glassfibre-Carbonfibre-Graphite) and GFRP Composites. Internationa l Journal of Engineering Research a nd Applications (IJERA), 3 (4). pp. 2015-2024. ISSN 2248-9622
Nusrathulla, M. and Shantharaja, M. (2014) Statistical Investigation of effect of parameters on low velocity impact of fiber reinforced plastic corrugated sandwich structure. International Journal of Latest Trends in Engineering and Technology (IJLTET, 4 (1). pp. 351-361. ISSN 2278-621X
Partha, A. and Rajaprakash, B.M. (2016) Numerical Simulation of Double Action Powder Compaction Process. International Journal of Scientific Research in Science, Engineering and Technology, 2 (1). pp. 46-51. ISSN 2394-4099
Paul Vizhian Simson, . and Ezhil Vannan, S. and Karthigeyan, R. (2014) Investigation on the Influence of Basalt Fiber on Thermal properties of Al7075/ Basalt Fiber Metal Matrix Composites. Procedia Engineering, 97. pp. 432-438. ISSN 1877-7058
Prakash, S.I. and Shivanand, H.K. and Santhosh Kumar, S. (2013) Studies On Tensile Properties Of Natural Fiber Polymer Matrix Composites. International Journal of Engineering Research & Technology (IJERT), 2 (3). pp. 1-3. ISSN 2278-0181
Prasad, A.J.K. and Shashidhara, S.M. and Muralidhara, B.K. (2011) Synthesis and characterization of mixture of nanozirconia and nanosilica obtained from commercially available zircon flour by sol-gel method. Bulletin of Materials Science, 34 (7). pp. 1339-1344. ISSN 02504707
Rajaprakash, B.M. and Suresha, C.N. and Rachappa, . and Sarala Upadhya, . (2014) Application of acoustic emission technique for online monitoring of friction stir welding process during welding of AA6061-T6 aluminum alloy. TMS 2014, Annual Meeting & Exhibition, Supplemental Proceedings. pp. 731-740. ISSN 978-1-118-88972-5
Rajaprakash, B.M. and Suresha, C.N. and Upadhya, S. (2013) Application of acoustic emission technique to monitor friction stir welding process to produce defect free welds. In: Friction Stir Welding and Processing VII - TMS 2013 Annual Meeting and Exhibition, 3 March 2013 through 7 March 2013, United States.
Rajasekar, K. and Saravanan, R. and Dhandapani, N.V. (2016) Design and optimization of variable rectangular cross section chassis for on-road heavy vehicles. International Journal of Vehicle Structures & Systems, 8 (1). ISSN 0975-3540
Rajashekar, R. and Mudabir, . and Rajaprakash, B.M. (2014) Thermomechanical modeling and Evaluation to study peak temperature and Flow stress of Friction Stir welds of Aluminum Alloy 6061. International Journal of Engineering Research & Technology, 3 (7). pp. 1492-1500. ISSN 2278-0181
Rajashekar, R. and Rajaprakash, B.M. (2013) Analysis of Banded Texture of Friction Stir Weld Bead Surface by Image Processing Technique. International Journal of Engineering Research a nd Development, 5 (8). pp. 30-39. ISSN 2278 - 067X
Rajashekar, R. and Rajaprakash, B.M. (2016) Development of a model for friction stir weld quality assessment using machine vision and acoustic emission techniques. Journal of Materials Processing Technology, 229. pp. 265-274. ISSN 09240136
Rajashekar, R. and Rajaprakash, B.M. and Upadhya, S. (2015) Assessment of friction stir weld quality by analyzing the weld bead surface using both digital image processing and acoustic emission techniques. In: Friction Stir Welding and Processing VIII - TMS 2015 144th Annual Meeting and Exhibition; Walt Disney WorldOrlando, 15 March 2015 through 19 March 2015, United States.
Ramakrishnaiah, . and Md Atiqur Rahman, . and Shivanand, H.K. (2014) Study of Mechanical Properties of Glass Fiber and Flyash Particulate Reinforced Al 2219 Hybrid Composites. International Journal of Engineering Research & Technology (IJERT), 3 (7). pp. 883-893. ISSN 2278-0181 (In Press)
Ramesha, D.K. and Adhiviraj Singh Bangari, . and Chirag, P.R. and Samartha Chaitanya, R. (2015) Crystal Structure of Ethyl 2-Acetyl-3,7-Dimethyl-5-(thiophen-2-yl)-5H-Thiazolo[3,2-A]pyrimidine-6-Carboxylate. Biofuels, 6 (1-2). pp. 9-19. ISSN 2056-9890
Ramesha, D.K. and Bangari, A.S. and Rathod, C.P. and Samartha Chaitanya, R. (2015) Combustion, performance and emissions characteristics of a biogas fuelled diesel engine with fish biodiesel as pilot fuel. Biofuels, 6 (1-2). pp. 9-19. ISSN 2056-9890
Ramesha, D.K. and Bangari, A.S. and Rathod, C.P. and Samartha Chaitanya, R. (2015) Experimental Investigation of Biogas-Biodiesel Dual Fuel Combustion in a Diesel Engine. Journal of Middle European Construction and Design of Cars, 13 (1). ISSN 1804-9338
Ramesha, D.K. and Bangari, A.S. and Rathod, C.P. and Samartha Chaitanya, R. (2015) Experimental Investigation of Biogas-Biodiesel Dual Fuel Combustion in a Diesel Engine. Journal of Middle European Construction and Design of Cars, 13 (1). pp. 1804-9338. ISSN 1804-9338
Ramesha, D.K. and Kishore, . and Sangamesh Hosur, . (2013) Numerical Investigation of Steel Grade Change using ANSYS. International Journal of Innovative Research in Science, Engineering and Technology, 2 (10). pp. 5601-5606. ISSN 2319-8753
Ramesha, D.K. and Kumara, G.P. and Lalsaheba, . and Mohammed, A.V.T. and Mohammad, H.A. and Kasma, M.A. (2015) An experimental study on usage of plastic oil and B20 algae biodiesel blend as substitute fuel to diesel engine. Environmental Science and Pollution Research. pp. 1-8. ISSN 09441344
Ramesha, D.K. and PremaKumara, G. and Sharma, K.V. (2011) Simulation of Three Dimensional Flows in Hydraulic Pumps. International Journal of Advanced Scientific and technical Research, 01 (01). pp. 62-68. ISSN 2249-9954
Ramesha, D.K. and Rajiv, K. and Thimmannachar, R. and Simhasan Manjunath Nagappa, . and Gowda, P.M. (2012) A Study on Performance, Combustion and Emission Characteristics of Compression Ignition Engine Using Fish Oil Biodiesel Blends. Journal of The Institution of Engineers (India): Series C, 93 (3). pp. 195-201. ISSN 2250-0553
Ramesha, D.K. and Rudra Murthy, . and Hemanth Kumar, P. (2013) CFD Analysis of Supersonic Exhaust in a Scramjet Engine. International Journal of Innovative Research in Science, Engineering and Technology, 2 (9). pp. 4383-4389. ISSN 2319 - 8753
Ramesha, D.K. and Tejas, K.S and Bharath, L. (2021) Examine the Impact of Addition Al2O3 as Nano Additive to Used Temple Oil Biodiesel Blends on Performance, Combustion and Emission Characteristics of CI Engine. AIP Conference Proceedings, 2316 (1). ISSN 1551-7616
Ramesha, D.K. and Vidyasagar, H.N. and Prem Kumar, G. (2012) CFD Simulation of Gas-solid-liquid Fluidised Bed Reactor. International Journal of Computational Science and Engineering, 07 (02). pp. 162-174. ISSN 1742-7193
Rathnakar, G. and Pal Pandian, P. and Shivanand, H.K. (2015) Investigations on the Flexural Strength and the Effect of b/h and l/b ratio on the Carbon Fiber Reinforced Epoxy Laminated Composites. International Journal for Research in Applied Science & Engineering Technology ( IJRASET), 3 (2). pp. 367-342. ISSN 2321 - 9653
Rathnakar, G. and Shivanand, H.K. (2014) Experimental Evaluation of Inter laminar Shear Strength of Fiber Reinforced Composites. International Journal of Mechanical Engineering and Robotics Research, 3 (4). pp. 72-79. ISSN 2278-0149
Rathnakar, G. and Shivanand, H.K. (2013) Experimental Evaluation of Strength and Stiffness of Fibre Reinforced Composites under Flexural loading. International Journal of Engineering and Innovative Technology, 2 (7). pp. 219-222. ISSN 2277-3754
Rathnakar, G. and Shivanand, H.K. (2013) Fiber Orientation and its Influence on the Flexural Strength of Glass Fiber and Graphite Fiber reinforced Polymer Composite. International Journal of Innovative Research in Science, Engineering and Technology, 2 (3). pp. 548-552. ISSN 2319-8753
Rathod, H.T. and Kilari Sridevi, . (2000) General complete Lagrange family for the cube in finite element interpolations. Computer Methods in Applied Mechanics and Engineering, 181 (1-3). pp. 295-344. ISSN 00457825
Reid, S.R. and Reddy, T.Y. (1983) Experimental investigation of inertia effects in one-dimensional metal ring systems subjected to end impact - I. Fixed-ended systems. International Journal of Impact Engineering, 1 (1). pp. 85-106. ISSN 0734743X
Rudra Naik, M. and Kempaiah, U.N. and Kushal, U.K. (2017) Analysis of MEMS Piezoelectric Hydrophone at High Sensitivity for underwater application. In: Materials Today.
Rudraiah, N. (1984) INTERNAL GRAVITY WAVES IN A CONTINUOUSLY STRATIFIED TURBULENT FLOW THROUGH POROUS MEDIA. Transactions of the Canadian Society for Mechanical Engineering, 8 (4). pp. 201-207. ISSN 0315-8977
Rudraiah, N. and Rajaprakash, B.M. (2014) Non-Linear Oberbeck convection in Chiral Fluid through a vertical permeable channel in the presence of a Traverse Magnetic Field. Journal of Applied Fluid Mechanics, 7 (1). pp. 35-41. ISSN 1735-3645
Rudraiah, N. and Rajaprakash, B.M. and Nagaraju, . and Sujatha, N. (2013) Effects of Magnetic field and Viscous Dissipation on Oberback Convection in a Chiral Fluid and Mass Transfer Flow through porous media. International Journal of Current Engineering and Technology, 3 (5). pp. 1821-1827. ISSN 2277 - 4106
Sangamesh, M.Hosur. and Ramesha, D.K. and Suman Basu, . (2014) Transient Simulation of Flow Past Smooth Circular Cylinder at very High Reynolds Number Using OpenFOAM. Applied Mechanics and Materials, 592 (594). pp. 1972-1977. ISSN 1662-7482.
Saravanan, R. (2013) Improvement of Service Quality in the Indian Automobile Service Sector-An Empirical Study. International Journal of Social Science and Interdisciplinary Research, 2 (12). pp. 96-104. ISSN 2277 3630
Saravanan, R. and Kapilan, N. and Magadum Sunil, . (2013) Kinematic Synthesis and Analysis of Four Bar Mechanism Using Expert System. Journal of Environmental Science , Computer Science and Engineering and Technology, 2 (2). pp. 422-426. ISSN 2278–179X
Saravanan, R. and Magadum Sunil, . (2013) Development of Expert System for Four Bar Mechanism. Journal of Environmental Science , Computer Science and Engineering and Technology, 2 (3). pp. 914-917. ISSN 2278–179X
Sathyanarayana Reddy, B.N. and Lakshmana Swamy, N. (2013) Effect of Bevel Angle in Bevel Groove Butt Joints on Shrinkages in CO2 Arc Welding Process. International Journal of Science and Advanced Technology, 3 (7). pp. 38-41. ISSN 2221 - 8386
Satish, N. and Vijaya Kumar, P. and Shivanand, H.K. (2014) Evaluation of Modal Damping of Graphite/ Epoxy Laminated Composites. The International Journal Of Engineering And Science (IJES), 3 (4). pp. 7-11. ISSN 2319 – 1813
Satish, N. and Vijaya Kumar, P.V. and Shivanand, H.K. (2013) Evaluation of Modal Damping in FRP based Laminated Composites through Modal Testing. International Journal of Engineering Science and Innovative Technology (IJESIT), 2 (1). ISSN 2319 - 5967
Seetha Girisha, A.V. and Sharma, K.V. (2013) Development of Ni-Sic Composite Coatings for Corrosion Studies. International Journal of Innovative Research in Science, Engineering and Technology, 2 (10). pp. 5650-5656. ISSN 2319-8753
Seethagirisha, A.V. and Sharma, K.V. (2013) Enhancement of Coating Thickness and Microhardness of Ni-Sic Nanocomposite Coatings for the Variation in Bath Parameters. International Journal of Mechanical Engineering and Technology, 4 (4). pp. 22-31. ISSN 0976 - 6359
Shankar, S. and Shivanand, H.K. and Eshwara Prasad Koorapati, . (2014) Compartive Study OF Experimental and Simulated Results of Compression Test on Epoxy Based E-Glass/Carbon Fiber Reinforced Polymer Composite Laminates. International Journal of Emerging Technology and Advanced Engineering, 4 (8). pp. 288-296. ISSN 2250 - 2459
Shantharaja, M. (2013) Mechanical Behaviour of Pure Aluminum Processed by Constrained Groove Pressing. Journal of Material Science and Engineering, 2 (3). ISSN 2169-0022
Shantharaja, M. (2015) Optimization of the buckling parameters for e-glass/epoxy sandwich structure using taguchi approach. International Journal of Science Technology & Management, 4 (1). ISSN 2394 - 1537
Shantharaja, M. and Imran Khan, K.A. and Shivanand, H.K. (2014) Evaluation of Wear Properties of Flyash and C-Glass Reinforced Al4046 Hybrid MMC. International Journal of Engineering Research & Technology (IJERT), 3 (9). pp. 1136-1138. ISSN 2278-0181
Shantharaja, M. and Sandeep, G.M. (2014) Experimental And Numerical Analysis Of Propagation Of Stress Wave in Sheet Metal. INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, 3 (10). pp. 40-42. ISSN 2277-8616
Shantharaja, M. and Srinivas, K.R. (2014) Comparison of Riveted Panel and Integral Panel for Damage Tolerance by using FEA. International Journal of Science and Research, 3 (9). pp. 426-431. ISSN 2319-7064
Shantharaju, M. and Siddesha, H.S. (2014) Optimization of Cyclic Constrained Groove pressing parameters for tensile properties of Al6061/sic metal matrix composites. In: International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2014, 2014.
Sharma, K and Seethagirisha, A. (2013) Effect of Variation in SiC Loading, Current Density and Bath Temperature on Coating Thickness and Tensile Strength of Ni-SiC Nanocomposite Coatings. World Journal of Engineering, 10 (06). pp. 515-522. ISSN 1708-5284
Sharma, K.V. and Sripathy, M. (2012) Comparative Studies of Crushing Behavior of Various Fiber Reinforced Skin Polyurethane Foam Cored Composite Sandwich Structures. In: Characterization of Minerals, Metals, and Materials. John Wiley and Sons, pp. 387-394. ISBN 978-111829122-1
Sharma, K.V. and Sripathy, M. (2012) Comparative studies of crushing behavior of various fiber reinforced skin polyurethane foam cored composite sandwich structures. In: Characterization of Minerals, Metals, and Materials - TMS 2012 Annual Meeting and Exhibition, 11 March 2012 through 15 March 2012, Orlando, FL; United States.
Sharma, S.C. and Krishna, M. and Shashishankar, A. and Vizhian, S.P. (2004) Damping behaviour of aluminium/short glass fibre composites. Materials Science and Engineering A, 364 (1-2). pp. 109-116. ISSN 0921-5093
Shashidhara, S.M. and Muralidhara, B.K. (2003) Studies on dry sand jet erosive wear characteristics of Co 2 sand cast Al-7075-corundum participate MMC. Transactions of the Indian Institute of Metals, 56 (4). pp. 445-448. ISSN 0019493X
Shivakumar, N. and Anindya Deb, . and Clifford Chou, . and Chittappa, H. (2014) A Methodology for Characterization of the Strain Rate-Dependent Behavior of PU Foam. SAE International Journal of Materials and Manufacturing, 7 (3). pp. 514-519. ISSN 1946-3987
Shivakumara, I.S. and Jinho Lee, . and Malashetty, M.S. and Sureshkumar, S. (2011) Effect of Thermal Modulation on the Onset of Convection in Walters B Viscoelastic Fluid-Saturated Porous Medium. Transport in Porous Media, 87 (1). pp. 291-307. ISSN 1573-1634
Shivanand, H.K. and Yogananda, A. (2015) Development and Characterization of Wear Properties of Aluminum 8011 Hybrid Metal Matrix Composites. International Journal of Materials and Metallurgical Engineering, 2 (12). pp. 18-22. ISSN 2455-2372
Shivnand, H.K. and Inamdar, P.S. and Sapthagiri, G. (2010) Evaluation of tensile and flexural properties of hemp and polypropylene based natural fiber composites. In: ICBEE 2010 - 2010 2nd International Conference on Chemical, Biological and Environmental Engineering, Proceedings, 2 November 2010 through 4 November 2010, Cairo,Egypt.
Siddesha, H.S. and Shantharaja, M. (2013) Characterization of mechanical properties of aluminum processed by repetitive corrugation and straightening process using Taguchi analysis. JOM, 65 (2). pp. 294-298. ISSN 1543-1851
Siddesha, H.S. and Shantharaja, M. (2015) Effect of Severe plastic deformation on Mechanical properties of Al6061/SiC Metal matrix composites. International Journal of Research in Engineering and Technology, 4 (8). pp. 22-24. ISSN 2319 - 1163
Siddesha, H.S. and Shantharaja, M. (2013) Study of Cyclic Constrained Groove Pressing Factors on Hardness Behavior of Al/Sic - MMC Subjected to Severe Plastic Deformation. IOSR Journal of Engineering, 3 (7). pp. 27-35. ISSN 2250-3021
Siddesha, H.S. and Shantharaja, M. and DilipKumar, K. and Umesh, C.K. (2015) Experimental and Computational Simulation of producing ultra-fine grain Structure processed by CGP. International Journal of Advance Research In Science And Engineering, 4 (2). pp. 580-591. ISSN 2319 - 8354
Somashekara, H.M. and Lakshmana Swamy, N. (2012) Optimizing Surface Roughness and MRR in turning operation using Taguchi's design of experiments approach. International Journal of Applied Engineering Research, 7 (8). pp. 887-895. ISSN 09734562
Sripathy Malaiah, . and Krishna Vinayak Sharma, . and Krishna, M. (2013) Investigation on Effect of Fiber and Orientation on the Properties of Bio-Fibre Reinforced Laminates. International Journal of Engineering Inventions, 2 (2). pp. 65-70. ISSN 2278 - 7461
Subhas, B.K. and Bhat, R. and Ramachandra, K. and Balakrishna, H.K. (2000) Dimensional instability studies in machining of Inconel 718 nickel based superalloy as applied to aerogas turbine components. Journal of Engineering for Gas Turbines and Power, 122 (1). pp. 55-61. ISSN 0742-4795
Subramanian, S. and Sridhar, K.S. and Umesh, C.K. (2014) Effect of corner radii on the thermal & fluid flow performance of the laminar flow through rectangular micro channel. International Journal of Thermal Technologies, 4 (4). 307 -312. ISSN 2277 – 4114
Subramanian, S. and Sridhar, K.S. and Umesh, C.K. (2014) Experimental & numerical study of forced convection laminar flow through copper micro channel heat sink. International Journal of Research in Engineering and Technology, 3 (12). 103 -111. ISSN 2319 - 1163
Sujith Kumar, S.G. and Hanumantharaju, H.G. (2013) An Investigation on Strength of SS316L and Cobalt- Chromium used as cardio Vascular Stent materials by nonlinear FEA. International Journal of Engineering Research & Technology (IJERT), 2 (12). pp. 1876-1884. ISSN 2278-0181
Sumana, B.G. and Vidya Sagar, H.N. and Krishna, M. and Rajkumar, G.R. (2014) Investigation of burst pressure on carbon/glass fiber reinforced polymer metal tube for high pressure applications. Procedia Materials Science, 5. pp. 535-539. ISSN 2211-8128
Sumana, B.G. and Vidya Sagar, H.N. and Sharma, K.V. and Krishna, M. (2015) Numerical analysis of stresses on layer-by-layer basis in FML composite cylinder subjected to external hydrostatic loading. Materials Sciences and Applications, 6. pp. 489-499. ISSN 2153-117X_
Sumana, B.G. and Vidya Sagar, H.N. and Sharma, K.V. and Krishna, M. (2015) Numerical analysis of the effect of fiber orientation on hydrostatic buckling behavior of fiber metal composite cylinder. Journal of Reinforced Plastics and Composites, 34 (17). pp. 1422-1432. ISSN 07316844
Sumod Daniel, . and Harish, G. (2015) Sliding Wear Behaviour of Aluminum Alloy (Lm-13)Reinforced with Nano-ZrO2 Matrix Composites. INTERNATIONAL JOURNAL OF INNOVATIONS IN ENGINEERING RESEARCH AND TECHNOLOGY [IJIERT], 2 (9). pp. 1-7. ISSN 2394-3696
Sumod Daniel, . and Harish, G. (2014) A Study on the behaviour of Aluminium alloy (LM13) reinforced with Nano ZrO2 Particulate. IOSR Journal of Engineering, 4 (2). pp. 58-62. ISSN 2250-3021
Sunith Babu, L. and Shivanand, H.K. (2015) Mechanical Characterization of PU based sandwich Composites with variation in core density. International Journal of Materials Science and Applications, 4 (4). pp. 277-282. ISSN 2327-2643
Suresh, K.R. and Niranjan, H.B. and Jebaraj, P.M. and Chowdiah, M.P. (2003) Tensile and wear properties of aluminum composites. Wear, 255 (1-6). pp. 638-642. ISSN 00431648
Suresha, C.N. and Rajaprakash, B.M. and Upadhya, S. (2011) A study of the effect of tool pin profiles on tensile strength of welded joints produced using friction stir welding process. Materials and Manufacturing Processes, 26 (9). pp. 1111-1116. ISSN 10426914
Tulsidas, D. and Shantharaja, M. (2015) Effect of taper and twisted blade in Steam Turbines. International Journal of Science Technology & Management, 4 (1). pp. 319-325. ISSN 2394 - 1537
Tulsidas, D. and Shantharaja, M. and Bharath, V.G. (2014) Life Estimation of a Steam Turbine Blade using Low Cycle Fatigue Analysis. Procedia Materials Science, 5. pp. 2392-2401. ISSN 2211-8128
Tulsidas, D. and Shantharaja, M. and Kumar, K.G. (2013) Improved fillet stresses in steam turbine blade. International Journal of Computer Aided Engineering and Technology, 5 (4). pp. 329-342. ISSN 17572657
Vannan, E. and Vizhian, P. (2015) Corrosion characteristics of basalt short fiber reinforced with Al-7075 metal matrix composites. Jordan Journal of Mechanical and Industrial Engineering, 9 (2). pp. 121-128. ISSN 19956665
Vannan, S.E. and Vizhian, S.P. (2014) Dry sliding wear behavior of basalt short fiber reinforced aluminum metal matrix composites. Applied Mechanics and Materials, 592-59. pp. 1285-1290. ISSN 1662-7482.
Vignesh, M. and Hanumantharaju, H.G. and Avinash, S. (2014) A study on Mechanical properties of Vinylester based bio composite with Starch as filler material. International Journal of Engineering Research and Applications ;, 4 (11). pp. 42-47. ISSN 2248 - 9622
Vijaykumar, M.S. and Saravanan, R. (2017) Analysis of epoxy nano clay composites compressive strength during salt spray test. International Journal of Mechanical Engineering and Technology, 8 (5). pp. 1105-1109. ISSN 09766340
Vijaykumar, M.S. and Saravanan, R. (2017) Analysis of epoxy nano clay composites compressive strength during tropical exposure test. International Journal of Mechanical Engineering and Technology, 8 (5). pp. 1101-1104. ISSN 09766340
Yuvaraja, C. and Sharma, K.V. (2009) A study of transition wear behavior of alumina particle reinforced Al-6061 MMCs. Journal of Reinforced Plastics and Composites, 28 (23). pp. 2903-2909. ISSN 07316844
Zakaulla, M. and Arjun, R. and Khan, M.A. and Nadeem Pasha, K. and Sharieff, S. (2017) Hybridizing Micro - B4C with Carbon nanotubes to Enhance the Mechanical Properties of Aluminium Matrix Composites. In: 1st International Conference on Materials, Alloys and Experimental Mechanics, ICMAEM 2017, 3 July 2017 through 4 July 2017, Hyderabad.
