Items where Division is "University Visvesvarayya College of Engineering > Department of Mechanical Engineering" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | G | H | J | K | M | R | S | T | V
Number of items: 28.

A

Amaresh Kumar Dhadange, . and Hanumantharaju, H.G. and Suresh, . and Karthik, K.K. and Ananda, S. (2015) Analytical Investigationand Comparision on Performance of SS316, SS440c and Titanium Alloy Tool Materials Used as Single point Cutting tool. International Journal of Engineering Research and Applications ;, 5 (8). pp. 55-61. ISSN 2248 - 9622

B

Biradar Shivanand Rajendra, . and Dadapeer, B. and Umesh, C.K. (2015) Analysis of Feed force, Tangential Force and Surface Roughness in Turning EN-353 Steel using uncoated ceramic cutting tool using Taguchi Method. International Journal for Scientifi c Research & Development, 3 (5). pp. 636-638. ISSN 2321 - 0613

C

Chenna Basappa Hampali, . and Chandrashekhar Bendigeri, . (2015) Investigation of Basic mechanical properties of Jute Reinforced polyster composites for Patellar Implant Application. International Journal Of Scientific Research And Education, 3 (12). pp. 4681-4686. ISSN 2321 - 7545

G

Ganga Reddy, C. and Shantharaja, M. (2015) “Statistical Investigation of Parameters influence in fracture toughness of glass fibre reinforced composites. International Journal of Emerging Technology and Advanced Engineering, 5 (4). pp. 219-224. ISSN 2250 - 2459

H

Hanumantharaju, H.G. and Motupalli Jayaprasad, . (2015) Free vibrational analysis of curved beam with uniform rectangular cross section. International Journal of Research in Engineering and Technology, 4 (11). pp. 356-361. ISSN 2319 - 1163

J

Jagannatha, T.D. and Harish, G. (2015) Influence of Carbon & Glass Fiber Reinforcements on Flexural Strength of Epoxy Matrix Polymer Hybrid Composites. International Journal of Engineering Research and Applications ;, 5 (4). pp. 109-112. ISSN 2248 - 9622

Jagannatha, T.D. and Harish, G. (2015) Influence of carbon & Glass Fiber Reinforcement on Flexural Strength of Epoxy Matrix Polymer Hybrid Composites. International Journal of Engineering Research and Applications, 5 (4). pp. 109-112. ISSN 2248 - 9622

Jagannatha, T.D. and Harish, G. (2015) Mechanical Properties of Carbon/Glass Fiber Reinforced Epoxy Hybrid Polymer Composites. International Journal of Mechanical Engineering and Robotics Research, 4 (2). pp. 131-137. ISSN 2278-0149

K

Kothakota Suresh Kumar, . and Amaresh Kumar Dhadange, . and Hanumantharaju, H.G. and Monish, G. and Sridhara, S.M. (2015) Investigation on SS316, and SS440C and Titanium alloy Grade-5 used as a single point cutting tool. International Journal of Engineering Research and Applications ;, 5 (1). pp. 1-5. ISSN 2248 - 9622

M

Manjunatha, R. and Umesh, C.K. (2015) Analysis and Prediction of feed force, tangential force, surface roughness and flank wear in Turning with uncoated carbide cutting tool using both Taguchi and Grey based taguchi method. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (7). pp. 1766-1774. ISSN 3159 - 0040

Mrityunjaya Swamy, K.M. and Ramesha, D.K. (2015) The Effect of Injection Pressure and Injection timing on the Performance and Emission Parameters with Algae oil Methyl Ester Blend as a Fuel for CI Engine. International Journal of Scientific and Research Publications, 5 (11). pp. 210-215. ISSN 2250 - 3153

R

Rajashekar, R. and Rajaprakash, B.M. and Upadhya, S. (2015) Assessment of friction stir weld quality by analyzing the weld bead surface using both digital image processing and acoustic emission techniques. In: Friction Stir Welding and Processing VIII - TMS 2015 144th Annual Meeting and Exhibition; Walt Disney WorldOrlando, 15 March 2015 through 19 March 2015, United States.

Ramesha, D.K. and Adhiviraj Singh Bangari, . and Chirag, P.R. and Samartha Chaitanya, R. (2015) Crystal Structure of Ethyl 2-Acetyl-3,7-Dimethyl-5-(thiophen-2-yl)-5H-Thiazolo[3,2-A]pyrimidine-6-Carboxylate. Biofuels, 6 (1-2). pp. 9-19. ISSN 2056-9890

Ramesha, D.K. and Bangari, A.S. and Rathod, C.P. and Samartha Chaitanya, R. (2015) Combustion, performance and emissions characteristics of a biogas fuelled diesel engine with fish biodiesel as pilot fuel. Biofuels, 6 (1-2). pp. 9-19. ISSN 2056-9890

Ramesha, D.K. and Bangari, A.S. and Rathod, C.P. and Samartha Chaitanya, R. (2015) Experimental Investigation of Biogas-Biodiesel Dual Fuel Combustion in a Diesel Engine. Journal of Middle European Construction and Design of Cars, 13 (1). ISSN 1804-9338

Ramesha, D.K. and Bangari, A.S. and Rathod, C.P. and Samartha Chaitanya, R. (2015) Experimental Investigation of Biogas-Biodiesel Dual Fuel Combustion in a Diesel Engine. Journal of Middle European Construction and Design of Cars, 13 (1). pp. 1804-9338. ISSN 1804-9338

Ramesha, D.K. and Kumara, G.P. and Lalsaheba, . and Mohammed, A.V.T. and Mohammad, H.A. and Kasma, M.A. (2015) An experimental study on usage of plastic oil and B20 algae biodiesel blend as substitute fuel to diesel engine. Environmental Science and Pollution Research. pp. 1-8. ISSN 09441344

Rathnakar, G. and Pal Pandian, P. and Shivanand, H.K. (2015) Investigations on the Flexural Strength and the Effect of b/h and l/b ratio on the Carbon Fiber Reinforced Epoxy Laminated Composites. International Journal for Research in Applied Science & Engineering Technology ( IJRASET), 3 (2). pp. 367-342. ISSN 2321 - 9653

S

Shantharaja, M. (2015) Optimization of the buckling parameters for e-glass/epoxy sandwich structure using taguchi approach. International Journal of Science Technology & Management, 4 (1). ISSN 2394 - 1537

Shivanand, H.K. and Yogananda, A. (2015) Development and Characterization of Wear Properties of Aluminum 8011 Hybrid Metal Matrix Composites. International Journal of Materials and Metallurgical Engineering, 2 (12). pp. 18-22. ISSN 2455-2372

Siddesha, H.S. and Shantharaja, M. (2015) Effect of Severe plastic deformation on Mechanical properties of Al6061/SiC Metal matrix composites. International Journal of Research in Engineering and Technology, 4 (8). pp. 22-24. ISSN 2319 - 1163

Siddesha, H.S. and Shantharaja, M. and DilipKumar, K. and Umesh, C.K. (2015) Experimental and Computational Simulation of producing ultra-fine grain Structure processed by CGP. International Journal of Advance Research In Science And Engineering, 4 (2). pp. 580-591. ISSN 2319 - 8354

Sumana, B.G. and Vidya Sagar, H.N. and Sharma, K.V. and Krishna, M. (2015) Numerical analysis of stresses on layer-by-layer basis in FML composite cylinder subjected to external hydrostatic loading. Materials Sciences and Applications, 6. pp. 489-499. ISSN 2153-117X_

Sumana, B.G. and Vidya Sagar, H.N. and Sharma, K.V. and Krishna, M. (2015) Numerical analysis of the effect of fiber orientation on hydrostatic buckling behavior of fiber metal composite cylinder. Journal of Reinforced Plastics and Composites, 34 (17). pp. 1422-1432. ISSN 07316844

Sumod Daniel, . and Harish, G. (2015) Sliding Wear Behaviour of Aluminum Alloy (Lm-13)Reinforced with Nano-ZrO2 Matrix Composites. INTERNATIONAL JOURNAL OF INNOVATIONS IN ENGINEERING RESEARCH AND TECHNOLOGY [IJIERT], 2 (9). pp. 1-7. ISSN 2394-3696

Sunith Babu, L. and Shivanand, H.K. (2015) Mechanical Characterization of PU based sandwich Composites with variation in core density. International Journal of Materials Science and Applications, 4 (4). pp. 277-282. ISSN 2327-2643

T

Tulsidas, D. and Shantharaja, M. (2015) Effect of taper and twisted blade in Steam Turbines. International Journal of Science Technology & Management, 4 (1). pp. 319-325. ISSN 2394 - 1537

V

Vannan, E. and Vizhian, P. (2015) Corrosion characteristics of basalt short fiber reinforced with Al-7075 metal matrix composites. Jordan Journal of Mechanical and Industrial Engineering, 9 (2). pp. 121-128. ISSN 19956665

This list was generated on Tue Dec 7 14:19:17 2021 IST.